No, because other apps running in the background would impact MIRACO’s ability to operate as intended.

Yes, the scanned models can be output in STL format, which is compatible with most slicer software.

No, MIRACO does not need to be connected to an internet-capable network to work. However, it will need to be connected to the internet for software updates.

Scans made with MIRACO can easily be transferred to Windows and macOS devices that have Revo Scan installed. You can download Revo Scan for free here: https://global.revopoint3d.com/pages/support-download

Yes, pause the scan, tap the Near/Far mode switching button, and continue your scan once the modes have been changed. This is particularly useful if you're scanning a large object that has some detailed areas. i.e. you. can use Far-mode to capture the object's overall shape quickly, then swap to Near-mode and get closer to the object to capture the fine details.

Yes, MIRACO can be used to scan cars or boats. Feel free to explore showcases from our beta testers: https://forum.revopoint3d.com/t/johnathan-beta-showcases-car-scanned-with-revopoint-miraco-3d-scanner/22187

Marker points are stuck on or around objects without geometric features so the MIRACO can track what it is scanning. When using Marker points, ensure that there are 5 marker points always in the frame when scanning. For Near-mode, place them in irregular patterns with around a 3 - 5 cm gap between them. For Far-mode, place them with a 5 cm gap between them.

Connect the Mini turntable to either your computer or a plug to power it, then use the controls on the Mini turntable’s side.

To use MIRACO’s single-shot capture mode, select it at the start of the scan. Then, during a scan, take a shot of the first area you want to capture, and MIRACO will capture a single frame. Then, aim MIRACO at the second area you want to capture while ensuring there is around a 50% overlap with the initial capture area so MIRACO can successfully merge the two shots.

No, repeated scanning makes your model worse. One scan close to the object will result in the best accuracy.

The MIRACO is unsuitable for scanning objects smaller than its minimum scan volume of 10mm x 10mm x 10mm. And similar to most 3D scanners, it may have difficulty with highly reflective or transparent objects. This can be overcome using a 3D scanning spray to coat the object's surface, which can help achieve effective scanning results.

Yes, but it won’t work well in direct sunlight, and while MIRACO has an IP45 rating, meaning it’s splash-resistant, we strongly recommend that you keep it away from water.