Yes, the MINI 2 comes with Revo Scan for free. It is compatible with iOS, macOS, Android, and Windows devices. In Revo Scan, you can perform scans and post-processing.

Yes, the scanned models can be output in STL format, which is compatible with most slicer software.

No, MINI 2 is only compatible with the Revo Scan software, which can be downloaded from our website or your device's app store. The models generated by the scan are compatible with nearly all third-party 3D modeling software.

No, MINI 2 doesn’t need to be connected to an internet-capable network to scan.

Ensure your phone and PC are connected to the same Wi-Fi network. Don’t minimize the app or turn off your phone's screen during the file transfer, or the transfer will fail.
Import from Phone via Verification Code
1. Click the Import From Phone button.
2. Open Revo Scan V5.0 or above on your phone, and find the project you want to share.
3. Tap the Share icon.
4. Enter the code shown on your PC to your smartphone.
5. Start file transferring.
Import from Phone via Scanning QR Code
1. Click the Import From Phone button.
2. Click the QR Code icon.
3. Open Revo Scan V5.0 or above on your phone, and find the project you want to share.
4. Tap the Share icon.
5. Scan the QR code on your PC.
6. Start file transferring.

Marker points are stuck on or around objects without geometric features so the MINI 2 can track what it is scanning. When using Marker points, place them in irregular patterns with around 1-2 cm between the markers across the object you’re scanning, and ensure that there are at least 5 marker points always in the frame when scanning.

Magic Mat is a 50 x 50 cm black mat with highly reflective marker points across its surface that is designed to make scanning featureless objects much easier by removing the need to place marker points on the item.

Connect the Mini turntable to either your computer or a plug to power it, then use the controls on the Mini turntable’s side. Detailed operating steps can be found in the Quick Start Guide.

No, repeated scanning makes your model worse. One scan close to the object will result in the best accuracy.

Like most 3D scanners, highly reflective, transparent, or dark objects can only be effectively scanned using 3D scanning spray to coat the object’s surface.

Sorry. With blue light technology, outdoor scanning is not recommended. However, if you must scan outside, wait for the sun to set or a very overcast day.

MINI 2 has a minimum scan volume of 10 mm x 10 mm x 10 mm.

Yes, but advanced scanning skills and post-process are needed.
For further information, please check this link:
https://revo.ink/3SrcMt2